Skip to main content

VMWare error: Unable to perform the operation. There is no available vRam capacity.

Cannot Add or Connect an ESXi Host to vCenter Server
You cannot add an ESXi host to vCenter Server.

Problem
You attempt to add or connect an ESXi host to vCenter Server but the operation is unsuccessful and you receive
the following error message.

"Unable to perform the operation. There is no available vRAM capacity."

Cause 

The vCenter Server system to which you tried to add the host to is licensed with a license key of vCenter Server Essentials that is part of the Essentials Kits. vCenter Server 5.0 Essentials licenses are hard-enforced, you cannot exceed the amount of pooled vRAM for vSphere 5.0 Essentials license keys that are assigned to the ESXi 5.0 hosts while the hosts are managed by vCenter Server. The memory that is configured to the powered-on virtual machines on the host that you try to add or reconnect exceeds the amount of pooled vRAM for vSphere Essentials. For details about vRAM and vRAM pooling, see “Licensing for ESXi 5.0 Hosts,” on page 68.

Solution
Reduce the amount of memory that is configured for the powered-on virtual machines and retry to add or
connect the ESXi host to vCenter Server.

Comments

Popular posts from this blog

Windows 7 Offline files will not go Online when connected to network

Issue Several laptop users move between networks, domain, home, etc and when they attempt to access DFS shares explorer status is working offline.  The issue only resolves it self after a reboot. Connecting directly to the share works and i am able to ping network resources.  This behavior occurs for VPN users as well. Possible Causes "slow-link mode". In win7 (with default settings) a client will enter slow-link mode if the latency to the server is above 80ms. In slow-link mode all writes are made to the local cache and a background sync only happens every 6 hours.  Depending on your connection the default slow link detection speed is 64,000 bps On client computers running Windows 7 or Windows Server 2008 R2, a shared folder automatically transitions to the slow-link mode if the round-trip latency of the network is greater than 80 milliseconds, or as configured by the "Configure slow-link mode" policy. After transitioning a folder to the slow-link mode, Offline Fil

SCCM Client Certificate (PKI) Value is None

SCCM Client Certificate (PKI) Value is None Stopping WMI service Stopping CCMExec SC Delete any sccm services (ccmexec, smstsmgr, cmecservice, ccmsetup) Delete C:\windows\ccm, C:\windows\ccmsetup, C:\windows\ccmcache, C:\Windows\SMSCFG.ini Go into regedit and remove: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\CCM HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\CCMSetup HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS Then restart WMI, and reinstall the client. You shouldn't need a reboot to complete this. Once this has been done the client will install and pick up the cert. https://www.windows-noob.com/forums/topic/12644-sccm-2012-client-certificate-pki-value-is-none/

SCCM Unknown computer not able to see Task Sequences after installing Current Branch 1702

Soon after installing SCCM CB 1702 we were unable to see Task Sequences deployed to the unknown collection. This issue was identified as a random system taking the GUID of the 'x64 Unknown Computer (x64 Unknown Computer)' record. As a result it was now a known GUID; as we were only deploying Task Sequences to the Unknown collection none were made available. 'x64 Unknown Computer (x64 Unknown Computer)' record 'x86 Unknown Computer (x86 Unknown Computer)' record To get the GUID of your unknown systems open SQL management studio and run the following command: --Sql Command to list the name and GUID for UnknownSystems record data select ItemKey, Name0,SMS_Unique_Identifier0 from UnknownSystem_DISC Using the returned GUID (SMS_Unique_Identifier0) we can find the hostname that has been assigned the 'x64 Unknown Computer (x64 Unknown Computer)' GUID by running the query below. --x64 Unknown Computers select Name0,SMS_Unique_Identifier0,Decommissioned0 from Sys